Perawatan Mesin Crusher Menggunakan Metode RCM dan MVSM di PT. Galatta Lestarindo Sijunjung

Authors

  • Meldia Fitri Universitas Putra Indonesia YPTK Padang
  • Mohammad Farid Universitas Putra Indonesia YPTK Padang
  • Hermanto Universitas Putra Indonesia YPTK Padang

DOI:

https://doi.org/10.35134/jitekin.v13i1.92

Keywords:

Dolomite, Maintenance, Reliabilty Centered Maintenance, Maintenance Value Stram Map, Failure Mode Effect Analysis

Abstract

PT. Gallata Lestarindo, which is located across Sumatra, Sei Lansek, Kec. Kamang Baru, West Sumatra which is committed to providing quality and useful products, namely the manufacture of organic fertilizer from dolmite stone or limestone, PT. Gallata Lestarindo Recognized as a growing, superior and trusted World Class Company as a fertilizer supplier, with the main focus on customer satisfaction. Based on preliminary observations made at PT. Galatta Leastarindo Sijunjung. While carrying out research at PT. Galatta Leastarindo Sijunjung, the crusher machine was often damaged which resulted in delays in the production process. Based on the problems above, this research was made to solve the problem of crusher machine maintenance using the Reliability Centered Maintenance (RCM) method and Maintenance Value Stream Map (MVSM) with Failure Modes and Effect Analysis (FMEA) calculations in an effort to increase production targets for smoothness in processing minerals, especially in mines dolomite rock. the results of maintenance intervals in 1 (one) month the company must provide time for maintenance on the machine with time on unit 1 for 82,24 hours, unit 2 for 29,72 hours and unit 3 for 2,82 hours.

 

References

Pemerintah RI. 2009. “Undang Undang Pertambangan Mineral Dan Batubara.” Uu No 4 Tahun 2009 Tentang Pertambangan Dan Batubara: 4.

Sufriadin Sufriadin, Purwanto Purwanto, Muhammad Rahmatul Jihad, Astina Aras, Angelia Santoso, Miftah Hujannah. 2021. “Analisis Mineralogi Dan Kimia Dolomit. Jurnal Geomine. 9(2). 95-102. https://doi.org/10.33536/jg.v9i2.922

Kurniawan, Fajar. (2013). Manajemen Perawatan Industri Teknik dan Aplikasi. Yogyakarta : Graha Ilmu.

Muzaki, Muhammad Luthfan. (2017). Analisis Perawatan Mesin dengan Pendekatan Reliability Centered Maintenance (RCM) dan Maintenance Value Stream Map (MVSM) (Sudi kasus pada UMKM ED Alumunium Yogyakarta). JOSI. 16(2). http://orcid.org/0000-0003-3279-0775

Asman, Aulia Rizky, and Endang Pudji Widjajati. 2021. “Analisis Kebijakan Perawatan Mesin Secara Corrective Dan Preventive Dengan Metode Rcm Di Cv Xyz.” Jurnal Manajemen Industri Dan Teknologi 2(3):24–34. https://doi:10.33005/juminten.v2i3.283

Kurniawati, Dwi Agustina, and Muhammad Lutfan Muzaki. 2017. “Analisis Perawatan Mesin Dengan Pendekatan RCM Dan MVSM.” Jurnal Optimasi Sistem Industri 16(2):89. https://doi:10.25077/josi.v16.n2.p89-105.2017

Raharja, Ilham Pramudya, Ida Bagus Suardika, and Heksa Galuh W. 2021. “Analisis Sistem Perawatan Mesin Bubut Menggunakan Metode Rcm (Reliability Centered Maintenance) Di Cv. Jaya Perkasa Teknik.” Industri Inovatif : Jurnal Teknik Industri 11(1):39–48. https://doi:10.36040/industri.v11i1.3414

Damanik, Gray Miller. 2020. “Perancangan Sistem Perawatan Komponen V-belt Pada Sistem Transmisi Dengan Metode RCM Dan MVSM ( Studi kasus PT. Perkebunan Sentool Zidam V / Brawijaya Jember) Design of v-belt componen treatment in transmission system with RCM and MVSM method (case study PT. Perkebunan Sentool Zidam V / Brawijaya Jember.”. Jurnal Teknik Peratanian Lampung. 9(4): 287–96. http://dx.doi.org/10.23960/jtep-l.v9i4.287-296

Syahabuddin, Agus. 2019. “Analisis Perawatan Mesin Bubut Cy-L1640G Dengan Metode Reliability Centered Maintenance (Rcm) Di Pt. Polymindo Permata.” JITMI (Jurnal Ilmiah Teknik Dan Manajemen Industri) 2(1):27. https://doi:10.32493/jitmi.v2i1.y2019.p27-36

Ahmadi, Noor, and Nur Yulianti Hidayah. 2017. “Jurnal Optimasi Sistem Industri Analisis Pemeliharaan Mesin Blowmould Dengan Metode RCM Di PT. . CCAI”. JOSI. 16(2): 167–76. http://orcid.org/0000-0003-4022-4538

N.B. Puspitasari dan A. Murtanto. “Penggunaan FMEA Dalam Mengidentifikasi resiko Kegagalan Proses Produksi Sarung ATM (Alat tenun Mesin) Studi Kasus PT. Asaputex jaya Tegal”. Jurnal J@TI Undip, Vol. 9(2), pp. 93-98, Mei 2014, https://doi.org/10.12777/jati.9.2.93-98

Taufik dan S. Septyani. “Penentuan Interval Waktu Perawatan Komponen Kritis Pada Mesin Turbin Di PT. PLN (Persero) Sektor Pembangkit Ombilin”. Jurnal Optimasi Sistem Industri. 14(2). 238-258. https://doi.org/10.25077/josi.v14.n2.p238-258.2015

Yulfitama, Bintang. 2020. “Analisis perawatan mesin produksi dengan metode Reliabilty Centered Maintenance (RCM) DI CV. Xyz”. Jurnal Forum Nuklir (JFN) 4(1) http://dx.doi.org/10.17146/jfn.2010.4.1.225

Ansori N. dan Mustajib I., Sistem Perawatan Terpadu. Yogyakarta: Graha ilmu, 2013.

Iqbal, Muhammad. 2017. Pengaruh Preventive Maintenance (Pemeliharaan Pencegahan) dan Breakdown Maintenance (Penggantian Komponen) Terhadap Kelancaran Proses Produksi di PT. Quarryndo Bukit Barokah, 1(3), 33–46. https://doi.org/10.36555/almana.v1i3.394

Kaharudin. 2020. Evaluasi kinerja mesin stone crusher dalam pencapaian target ptoduksi di PT. Rangga Eka Pratama di Desa Jala, Kecamatan Hu"u Kab. Dompu. https://repository.ummat.ac.id/id/eprint/1270

Downloads

Published

2023-06-30

How to Cite

Meldia Fitri, Mohammad Farid, & Hermanto. (2023). Perawatan Mesin Crusher Menggunakan Metode RCM dan MVSM di PT. Galatta Lestarindo Sijunjung. Jurnal Teknologi, 13(1), 52–57. https://doi.org/10.35134/jitekin.v13i1.92

Issue

Vol. 13 No. 1 (2023): Jurnal Teknologi

Section

Articles

License

Copyright (c) 2023 Jurnal Teknologi

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.