Penelitian untuk Menekan Bullwhip Effect dalam Manajemen Rantai Pasok dengan Metode Periodic Review

Authors

  • Susriyati Universitas Putra Indonesia YPTK Padang
  • Mohammad Farid Universitas Putra Indonesia YPTK Padang
  • Beni Harma Universitas Putra Indonesia YPTK Padang
  • Pebi Egia Sapitri Universitas Putra Indonesia YPTK Padang

DOI:

https://doi.org/10.35134/jitekin.v12i2.80

Keywords:

Supply Chain Management, Descriptive Exploratory, Bullwhip Effect, Periodic Review, Demand Analysis

Abstract

This article presents research in the field of Supply Chain Management, the method used is descriptive exploratory method, using this research method it will be known about the object under study, resulting in conclusions from the research process carried out. The descriptive method is to find out and explain the characteristics of the variables studied in a situation and to describe aspects that are relevant to the research phenomenon. Research was conducted on this furniture business (CV. Budi Perabot), it is difficult for the company to determine the optimal amount of production because the demands of each retailer are different every month. After calculating the Bullwhip Effect using the Periodic Review method, it is known that the value of the Bullwhip Effect is a wardrobe of 1, a bed of 0.919, a dresser of 1.19, a display cabinet of 0.97. The application of the Periodic Review method has a positive impact because it is able to reduce or reduce the value of the Bullwhip Effect and minimize those in orders, demands and sales. In addition, the Periodic Review method is also able to create inventory at the recommended level on the number of orders. Comparison of the value of the Bullwhip Effect before applying the Periodic Review method for all products was 8,988 and after applying the Periodic Review method, it was reduced to 4,079. The comparison value was 4,909 after adding up all the products under study.

References

Latuny, W., & Picauly, W. M. (2019). Analisis Bullwhip Effect dengan Menggunakan Metode Peramalan pada Supply Chain di Distributor PT. Semen Tonasa (Studi Kasus: Distributor PT. Semen Tonasa). Arika, 13(2), 113-126. https://dx.doi.org/10.30598/arika.2019.13.2.113

Erlin, E., Erni, E., Maggie, M., Vincent, V., Zidane, Z., Cuandra, F., & Laulita, N. B. (2022). Pengaruh Manajemen Rantai Pasok Berbasis Sistem Enterprise Resources Planning Dalam Meningkatkan Kinerja Pada PT Indofood CBP Sukses Makmur. Jurnal Penelitian Inovatif, 2(2), 237-244.https://doi.org/10.54082/jupin.68

Pujawan, Nyoman. Mahendrawathi. (2017). Supply Chain Management. Yogyakarta: Andi.

Ahyadi, H., & Khodijah, S., (2017). Analisis pengendalian persediaan suku cadang pesawat B737-NG dengan pendekatan model Periodic Review di PT.X. Bina Teknika 47-58. http://dx.doi.org/10.54378/bt.v13i1.23

Setyowinarno, I,. Asmoro, D. J., & Amrozi, Y. (2020). Analisis Perancangan Si-Stok Untuk Mengurangi Bullwhip Effect Dalam Industri Garmen. Jurnal METHODIKA. 6 (2). https://doi.org/10.46880/mtk.v6i2.243.

Andriantantri, E., & Indriani, S., (2021). The reduction of Bullwhip Effect by Integrating Information Sharing, Forecasting, Economic Order Quantity (EOQ) - Vendor Management

Inventory (VMI) - and Consignment (Cs) Approach. International Journal of Innovation and Scientific Research. 54 (2). http://www.ijisr.issr-journals.org.

Samangi, A., & Perdana, T. (2018). Pemilihan Metode Peramalan Dalam Manajemen Persediaan Produk Pertanian. Jurnal Agroekoteknologi dan Agribisnis. 2 (1). https://doi.org/10.51852/jaa.v2i1.132

Purba, F, B,. Andrawina. L., & Astuti, M.D. (2018). An Optimal Order Quantity Of Spare Parts To Minimize Total Inventory Cost Using Periodic Review Approach (R,S,S) Method In PT. Xyz Bandung. International Journal of Innovation in Enterprise System (IJIES). 2 (1), 60–6. https://doi.org/10.25124/ijies.v2i01.18

Amran, T. G., & Haribowo, D. S. (2018). Inventory Model Design Of Raw Material With Economic Order Quantity–Vendor Management Inventory-Consignment Approach. In Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2017.

Ratnawia., Aurachman, R., & Kenaka, S. P., (2019). Determination Of Inventory Periodic Review Policy (R, S, S) Using Power Approximation Method For Minimize Total Inventory Cost In PT. OPQ. International Journal of Innovation in Enterprise System (IJIES). 3 (1), 47–52. https://doi.org/10.25124/ijies.v3i01.33

Anatan, L., & Ellitan, L. (2008). Supply Chain Management. Theory and Application. Bandung: Alfabeta.

Arfian A.F., & Prabowo R. (2021). Penggunaan metode vendor inventory dan distribution resource planning untuk mengurangi Bullwhip Effect (studi kasus: PT.X). Proc. ITATS. Surabaya.

Febryanto I. 2018. Analisis Bullwhip Effect Pada Perencanaan Kebutuhan Material Belt Conveyor. Wahana, 70(1), 47–51. https://doi.org/10.36456/wahana.v70i1.1567

Kholidasari, I., Bidiawati, J. A., & Sari, M. E. (2019, August). The evaluation of Bullwhip Effect on distribution system of a supply chain using centralized demand information method. In IOP Conference Series: Materials Science and Engineering (Vol. 602, No. 1, p. 012051). IOP Publishing. https://doi.org/10.1088/1757-899X/602/1/012051

Kholil, M., Almahdy, I., Fortinina, A., & Suparno, A. (2020). Implementation of Continuous Review System Method, Periodic Review System Method and Min-Max Method for Cheese Powder Inventory (Case Study: PT. Mayora Indah TBK). International Journal of Advanced Technology in Mechanical, Mechatronics and Materials, 1(2), 45-49. https://doi.org/10.14445/23499362/IJIE-V7I2P104

Lestari, P., Irena, L., & Widyadana, I. G. A. (2017). Pengaruh Penentuan Jumlah Pemesanan Pada Bullwhip Effect. J@ ti Undip: Jurnal Teknik Industri, 12(1), 49-56.https://dx.doi.org/10.14710/jati.12.1.49-56

Martono. (2020). Dasar-dasar manajemen rantai pasok. Jakarta: Bumi Aksara.

George, J., & Madhusudanan, P. V. (2020). Bullwhip Effect Quantification in a Supply Chain under Periodic Review Inventory Policies. In Emerging Technologies for Sustainability (pp. 433-440). CRC Press..

Holgado de Frutos, E., Trapero, J. R., & Ramos, F. (2020). A literature review on operational decisions applied to collaborative supply chains. PloS one, 15(3), e0230152. https://doi.org/10.1371/journal.pone.0230152

Nimmy, J. S., Chilkapure, A., & Pillai, V. M. (2019). Literature review on supply chain collaboration: comparison of various collaborative techniques. Journal of Advances in Management Research.https://doi.org/10.1108/JAMR-10-2018-0087

Tang, L., Yang, T., Tu, Y., & Ma, Y. (2021). Supply chain information sharing under consideration of Bullwhip Effect and system robustness. Flexible Services and Manufacturing Journal, 33(2), 337-380. https://doi.org/10.1007/s10696-020-09384-6

George, J., & Pillai, V. M. (2019, November). A study of factors affecting supply chain performance. In Journal of Physics: Conference Series (Vol. 1355, No. 1, p. 012018). IOP Publishing.https://doi.org/10.1088/1742-6596/1355/1/012018

Hardani, H., Andriani, H., Fardani, R. A., Ustiawaty, J., Utami, E. F., Sukmana, D. J., & Istiqomah, R. R. (2020). Metode penelitian kualitatif & kuantitatif. Yogyakarta: Pustaka Ilmu.

Sugiyono (2013). Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung: Alfabeta,

Maserih, M. (2017). Analisis Bullwhip Effect Dan Day Of Inventory (Doi) Serta Implikasinya Terhadap Supply Chain Management. Jurnal STEI Ekonomi, 26(01), 123-135. https://doi.org/10.36406/jemi.v26i01.199

Downloads

Published

2022-12-27

How to Cite

Susriyati, Farid, M. ., Beni Harma, & Pebi Egia Sapitri. (2022). Penelitian untuk Menekan Bullwhip Effect dalam Manajemen Rantai Pasok dengan Metode Periodic Review . Jurnal Teknologi, 12(2), 74–79. https://doi.org/10.35134/jitekin.v12i2.80

Issue

Vol. 12 No. 2 (2022): Jurnal Teknologi

Section

Articles

License

Copyright (c) 2022 Jurnal Teknologi

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.